Juniper EX4300 Series Hardware Manual page 73

Table 14: Uplink Modules in EX4300-48MP and EX4300-48MP-S Switches
Uplink Module Model Number
Name
4-port 1-Gigabit EX-UM-4SFPP-MR
Ethernet SFP/
10-Gigabit Ethernet
SFP+ uplink module
NOTE: Uplink modules and transceivers are not part of the shipping configuration. You must
order them separately.
Table 15 on page 64 shows the uplink modules used in 24-port and 48-port EX4300 switches except
EX4300-48MP and EX4300-48MP-S switches.
32-port EX4300 switches.
EX4300-48MP-S switches.
Description
You can install four
SFP transceivers,
four SFP+
transceivers, or a
combination of SFP
and SFP+
transceivers in the
four ports of this
uplink module.
NOTE: You cannot
configure the ports
on the uplink
module in
EX4300-48MP and
EX4300-48MP-S
switches as Virtual
Chassis ports
(VCPs).
Table 16 on page 65
Table 17 on page 67 shows the uplink modules used in EX4300-48MP and
(Continued)
Supported EX4300 First Junos OS
Switches Release
Junos OS Release
•
EX4300-48MP
18.2R1
•
EX4300-48MP-
NOTE: Starting in
S
Junos OS Release
19.1R1, you can
install SFP
transceivers in the
uplink module. In
Junos OS Release
18.2R1 through
Junos OS Release
18.4R1, the uplink
module supported
only SFP+
transceivers.
shows the uplink modules used in
63