Juniper EX4300 Series Hardware Manual page 280

• Table 87 on page 286—Describes the chassis viewer for EX8216 switches.
• Table 88 on page 288—Describes the chassis viewer for the XRE200 External Routing Engines.
Table 77: Chassis Viewer for EX2200 Switches
Field
Front View
Interface status
Rear View
Management (me0) port
Console port
USB port
Fan tray
Power supply
Description
In the image, the following colors denote the interface status:
•
Green—Interface is up and operational.
•
Yellow—Interface is up but is nonoperational.
•
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
The management port is used to connect the switch to a management device for out-
of-band management.
The console port is used to connect the switch to a management console or to a
console server. (You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper
Networks for your EX Series switch.
Mouse over the fan tray icon to display name, status, and description information.
Mouse over the power outlet icon to display name, status, and description
information.
270