Juniper EX4300 Series Hardware Manual page 347

Table 94: show chassis environment Output Fields
Field Name Field Description
Status
Status of the specified chassis component. For example, if
can be:
• OK
• Testing
• Failed
• Absent
Measurement
Depends on the Class. For example, if
Celsius (°C) and degrees Fahrenheit (°F). If the
2. Issue the command
show chassis temperature-thresholds
temperature threshold settings. Following is a sample output on an EX9208 switch. The output is
similar on other EX Series switches.
show chassis temperature-thresholds (EX9208 Switch)
user@ host> show chassis temperature-thresholds
Fan speed
(degrees C)
Item Normal High
Chassis default 48
Routing Engine 0 70
FPC 3 55
FPC 5 55
Table 95 on page 338
table lists output fields in the approximate order in which they appear.
: The fans are operational.
: The fans are being tested during initial power-on.
: The fans have failed or the fans are not spinning.
: The fan tray is not installed.
Yellow alarm
(degrees C)
Normal Bad fan
54 65 55
80 95 95
60 75 65
60 75 65
lists the output fields for the show chassis temperature-thresholds command. The
(Continued)
Class Temp
is , indicates the temperature in degrees
Class Fans
is
. This command displays the chassis
Red alarm Fire Shutdown
(degrees C) (degrees C)
Normal Bad fan
80 65
110 110
105 80
90 80
Class Fans
is , the fan status
, indicates actual fan RPM.
Normal
100
112
110
95
337