Juniper EX4300 Series Hardware Manual page 283

Table 79: Chassis Viewer for EX3200, EX3300, and EX4200 Switches
Field
USB port
Fan tray
Power supply
Rear View of the EX3300 and EX4200 Switch
Fan tray
Virtual Chassis port
USB port
Management (me0)
port
Console port
Power supplies
Description
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
Mouse over the fan tray icon to display name, status, and description information.
Mouse over the power supply icon to display name, status, and description information.
Mouse over the fan tray icon to display name, status, and description information. For a
Virtual Chassis, the status of the fans of the selected member switch is displayed.
Displayed only when EX4200 switches are configured as a Virtual Chassis. The
following colors denote the Virtual Chassis port (VCP) status:
•
Green—VCP is up and operational.
•
Yellow—VCP is up but is nonoperational.
•
Gray—VCP is down and nonoperational.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
The management port is used to connect the switch to a management device for out-
of-band management.
The console port is used to connect the switch to a management console or to a
console server. (You might do this for initial switch configuration.)
Mouse over the power supply icons to display name, status, and description
information.
(Continued)
273