Juniper EX4300 Series Hardware Manual page 87

2 Link activity LED of the uplink module port
—
Figure 35: LEDs on the 8-Port 10-Gigabit Ethernet SFP+ Uplink Module for EX4300-32F Switches
1 Status LED of the uplink module
—
Link activity LED of the lower port
2
—
Link activity LED of the upper port
3
—
Figure 36: LEDs on the Ports on the 2-Port 40-Gigabit Ethernet QSFP+/100-Gigabit Ethernet QSFP28
Uplink Module for EX4300-48MP and EX4300-48MP-S Switches
1 Captive screws of the uplink module
—
2 Link activity LED of the uplink module port
—
Link activity LED of the uplink module port
3
—
There are four LEDs for each port (labeled 2, 3, 4, and 5 in
to operate at 10-Gbps speed by using breakout cables, four 10-Gbps interfaces are created and the four
LEDs for that port becomes operational. Each of these LEDs indicates the link activity on the
4 Status LED the lower port
—
Status LED the upper port
5
—
4 Link activity LED of the uplink module port
—
5 Link activity LED of the uplink module port
—
Handle of the uplink module
6
—
Figure 36 on page 77). If a port is configured
77