Installing An Uplink Module In An Ex4300 Switch - Juniper EX4300 Series Hardware Manual

Hide thumbs Also See for EX4300 Series:

Table of Contents

NOTE: The procedure is the same for EX4300-48MP and EX4300-48MP-S switches.

Figure 93: Removing a 2-Port 40-Gigabit Ethernet QSFP+ Uplink Module from a 32-Port EX4300

Figure 94: Removing an 8-Port 10-Gigabit Ethernet SFP+ Uplink Module from a 32-Port EX4300

Installing an Uplink Module in an EX4300 Switch

Before you begin installing an uplink module in the switch:

• Ensure that you have taken the necessary precautions to prevent ESD damage (see

Electrostatic Discharge Damage

Ensure that you have the following parts and tools available:

• Electrostatic discharge (ESD) grounding strap (If a grounding strap is not available, follow the

alternative grounding method described in Step 1 of the following procedure.)

• Phillips (+) screwdriver, number 2

Prevention of