Juniper EX4300 Series Hardware Manual page 116

power supplies are shipped with AC power cords with the C13 coupler type and the 1100 W AC power
supplies and 1400 W AC power supplies are shipped with AC power cord with the C15 coupler type as
described by International Electrotechnical Commission (IEC) standard 60320. The plug end of the
power cord fits into the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 ft (4.5 m) in length, to comply
with National Electrical Code (NEC) Section 400-8 (NFPA 75, 5-2.2) and Canadian Electrical
Code (CEC) Section 4-010(3).
The tables in this topic list the AC power cords specifications provided for different power supplies for
each country or region.
• Table 43 on page 106—Power cords for 350 W AC for EX4300 switches except EX4300-48MP and
EX4300-48MP-S switches and 715 W AC power supplies for EX4300 switches
• Table 44 on page 108—Specifications of power cords used to connect EX4300 switches to C13
power
• Table 45 on page 109—Power cords for 1100 W AC power supplies for EX4300 switches and
1400 W AC power supplies for EX4300-48MP and EX4300-48MP-S Switches
Table 43: AC Power Cord Specifications for 350 W Power Supplies for EX4300 Switches Except
EX4300-48MP and EX4300-48MP-S Switches and 715 W AC Power Supplies for EX4300 Switches
Country/ Electrical
Region Specifications
Argentina 250 VAC, 10 A, 50 Hz
Australia 250 VAC, 10 A, 50 Hz
Brazil 250 VAC, 10 A, 50 Hz
Plug Standards Juniper Model
Number
IRAM 2073 Type CBL-EX-PWR-C13-
RA/3 AR
AS/NZS 3112 Type CBL-EX-PWR-C13-
SAA/3 AU
NBR 14136 Type CBL-EX-PWR-C13-
BR/3 BR
Graphic
No graphic available
No graphic available
106