Juniper EX4300 Series Hardware Manual page 271

Table 74: System Information
Field
Inventory details
(Continued)
Description
Indicates the following:
•
•
•
•
•
•
For EX3200, EX2200, EX2200-C, EX3300, EX4200,
EX4300-48MP, EX4500, and EX4550 switches that
are not configured as Virtual Chassis, the value
displayed in Inventory details field is always 1 FPC.
FPC is a legacy term for a slot in a large Juniper
Networks chassis; which simply refers to the
standalone switch.
For EX2200 and EX2200-C switches configured as
a Virtual Chassis, the value displayed in the
Inventory details field is 1–4 FPC, with the number
corresponding to the number of member switches.
For EX3300 switches configured as a Virtual
Chassis, the value displayed in the Inventory details
field is 1–6 FPC, with the number corresponding to
the number of member switches.
NOTE: For Junos OS Release 14.1X53-D10 and
later, EX3300 switches configured as a Virtual
Chassis display the value 1–10 FPC in the
Inventory details field.
For EX4200, EX4500, and EX4550 switches
configured as a Virtual Chassis, the value displayed
in the Inventory details field is 1–10 FPC, with the
number corresponding to the number of member
switches.
For EX4650, EX4400, EX4100, and EX4100-F
switches, the value displayed in Inventory details
field is equal to the number of FPCs.
For EX6210 switches, the values displayed in the
Inventory details field are 1–2 CB and 1–9 FPC. CB,
or Control Board, refers to the SRE module. FPC
refers to line cards and the FPC within the CB.
261