Juniper EX4300 Series Hardware Manual page 292

Table 83: Chassis Viewer for EX4550 Switches
Field Description
Fan tray Mouse over the fan tray icon to display the status of the fans and airflow direction
information. For a Virtual Chassis, the status of the fans of the selected member switch is
displayed.
Virtual Chassis port Displayed only when switches are configured as a Virtual Chassis. In the image, the colors
listed below denote the Virtual Chassis port (VCP) status:
•
•
•
Power supplies Mouse over the power supply icons to display name, status, and description information.
PIC2 slot You can insert an uplink module or a Virtual Chassis module into the PIC2 slot. Mouse
over to display the details of the module inserted (uplink or Virtual Chassis).
Table 84: Chassis Viewer for EX4650 Switches
Field
Front View
SFP28 and QSFP28 Ports
Rear View
Management port
Virtual Chassis ports
(Continued)
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Description
Displays 48 small form-factor pluggable (SFP28) ports and eight 100-Gbps quad
small form-factor pluggable (QSFP28) ports.
Mouse over the interface (port) to view more information.
The management port (em0) is used to connect the switch to a management device
for out-of-band management.
Not supported.
282