Juniper EX4300 Series Hardware Manual page 272

Table 74: System Information
Field
Junos image
Boot image
(Continued)
Description
•
•
•
Indicates the version of the Junos OS image. In a
Virtual Chassis configuration, the Junos OS image of
the primary switch is displayed by default. To display
the Junos OS image of a specific switch, click the
image of that switch.
NOTE: For EX4650, EX4400, EX4100, and EX4100-F
switches, the Junos OS image of the primary switch is
displayed by default. To display the Junos OS image of
a specific switch, click the image of that switch.
Indicates the version of the boot image that is used. In
a Virtual Chassis configuration, the boot image of the
primary switch is displayed by default. To display the
boot image of a specific switch, click the image of that
switch.
NOTE: For EX4650, EX4400, EX4100, and EX4100-F
switches, the boot image of the primary switch is
displayed by default. To display the boot image of a
specific switch, click the image of that switch.
For an EX8208 switch, the values displayed in
Inventory details field are 1–3 CB and 0–8 FPC. CB,
or Control Board, refers to SRE and SF modules.
FPC refers to line cards.
For EX8216 switches, the values displayed in
Inventory details field are 1–2 CB and 0–16 FPC.
CB, or Control Board, refers to RE modules and
FPC refers to line cards.
For an XRE200 External Routing Engine in an
EX8200 Virtual Chassis, the value displayed in
Inventory details is 1 XRE. XRE refers to RE
modules. For XRE200 External Routing Engines
configured as a Virtual Chassis, the values displayed
in Inventory details are 1–2 XRE and 0–4 LCC,
where LCC refers to the EX8200 line card chassis.
262