• EX4300-48T-S
• EX4300-48P-S
Uplink modules and transceivers are not part of the shipping configuration. If you want to
purchase any of these components, power supplies, or fan modules for your switch, you must
order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addition, change, or upgrade of
hardware components at
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.
SEE ALSO
Installing and Removing EX4300 Switch Hardware Components
EX4300 Chassis
IN THIS SECTION
LCD Panel in EX4300 Switches | 54
Uplink Modules in EX4300 Switches | 59
Chassis Status LEDs on EX4300 Switches | 69
Management Port LEDs on EX4300 Switches | 72
Network Port, Built-In QSFP+ Port, Uplink Port, and Uplink Module Port LEDs on EX4300 Switches | 74
https:/ /www.juniper.net/customers/support/tools/updateinstallbase/
53
.