Juniper EX4300 Series Hardware Manual page 267

• The Update Available window will
Check for updates automatically on every login in the
Maintain > Update J-Web side pane. By default, the
login is selected.
Update Later , you can update to the latest J-Web Application package by
• If you choose
clicking the orange icon next to
through Maintain > Update J-Web.
• Starting in Junos OS Release 22.3R1 which aligns with the J-Web Application package release
22.3A1, J-Web supports EX4400 switches.
• Starting in Junos OS Release 22.4R1 which aligns with the J-Web Application package release
22.4A1, J-Web supports EX4100 and EX4100-F switches.
The dashboard comprises a graphical chassis viewer and four panels.
Graphical Chassis Viewer
The Dashboard panel displays a graphical view of the chassis of a switch. In a Virtual Chassis, it displays
a graphical view of each member switch.
In a Virtual Chassis, the default values are shown on the Dashboard panel when no chassis image is
clicked. The panel displays the value for a switch if you click its image.
NOTE:
• If the member switch is not present, inactive, or not provisioned, you cannot expand the
member switch image.
• Starting in J-Web Application Package Release 19.2A1, J-Web supports EX4650 switches.
NOTE: For EX4650 switches, chassis viewer supports only the standalone view and
does not support the Virtual Chassis configuration.
not appear when you log in, if you have not selected the
Update Preference section in the
Check for update automatically on every
Update Available on the top pane of the J-Web interface or
257