Ex4300 Switch Models - Juniper EX4300 Series Hardware Manual
Hide thumbs
Also See for EX4300 Series:
- Hardware manual (354 pages) ,
- Quick start manual (11 pages) ,
- Manual (9 pages)
Table of Contents
Advertisement
Figure 15 on page 29
shows the components on the rear panel of EX4300-48MP and EX4300-48MP-S
switches (with one AC power supply and two fan modules installed).
Figure 15: Components on the Rear Panel of EX4300-48MP and EX4300-48MP-S Switches
1
Management port
—
ESD point
2
—
3
Fan module
—
4
Serial number label
—
5
CLEI code label
—
AC power supply in slot 0
6
—
NOTE: The protective earthing terminal is located on the left side of the chassis. See
Earth Ground to an EX Series Switch
EX4300 Switch Models
The EX4300 switch is available with 24, 32, or 48 ports and with or without Power over Ethernet (PoE+)
capability. EX4300 switches support AC and DC power supplies depending on the switch model.
EX4300-24P, EX4300-24P-S, EX4300-48P and EX4300-48P-S provide PoE+. EX4300-48MP, and
EX4300-48MP-S provide PoE++.
models.
7
—
8
—
9
—
10
—
11
—
.
Table 8 on page 30
lists the components shipped with EX4300 switch
Empty slot for AC power supply
QSFP+ ports (dedicated Virtual Chassis
ports)
Console port
Reset button
USB port
29
Connect
Advertisement
Table of Contents
Troubleshooting
