Juniper EX4300 Series Hardware Manual page 269

Table 73: Status of a Member Switch in a Virtual Chassis
If the member switch is
Present
Not present
Inactive
Not provisioned
Click Rear View for a graphical view of the rear panel of the switch.
Click Preferences to choose which panels must be displayed and set the refresh interval for chassis
viewer information. Click OK to save your changes and return to the dashboard or click Cancel to return
to the dashboard without saving changes.
NOTE: You can drag the various panels to different locations in the J-Web window.
It appears as It means the member switch
Prsnt Has established physical and logical connections with Virtual Chassis
member switches.
dimmed and Has been disconnected from the existing Virtual Chassis.
NotPrsnt
dimmed and Has established physical connections, but is unable to establish logical
connections.
Inactive
dimmed and Cannot synchronize with the existing preprovisioned Virtual Chassis.
Unprvsnd
259