Juniper EX4300 Series Hardware Manual page 20
Hide thumbs
Also See for EX4300 Series:
- Hardware manual (354 pages) ,
- Quick start manual (11 pages) ,
- Manual (9 pages)
Table of Contents
Advertisement
The switch supports the 4-port 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ uplink module
(model number: EX-UM-4SFPP-MR) from Junos OS Release 18.2R1 onwards. Starting in
Junos OS Release 19.1R1, you can install SFP transceivers in the uplink module. In Junos OS
Release 18.2R1 through Junos OS Release 18.4R1, the uplink module supported only SFP+
transceivers.
Figure 5 on page 10
shows the front panel of 48 port EX4300 switches except EX4300-48MP and
EX4300-48MP-S switches.
EX4300-48MP-S switches.
Figure 5: Front Panel of 48-Port EX4300 Switches Except EX4300-48MP and EX4300-48MP-S
Switches
Figure 6: Front Panel of EX4300-48MP and EX4300-48MP-S Switches
Figure 7 on page 11
shows the rear panel of 48-port EX4300 switches except EX4300-48MP and
EX4300-48MP-S switches, with power supplies and fan modules installed.
Figure 6 on page 10
shows the front panel of EX4300-48MP and
Figure 8 on page 11
shows
10
Advertisement
Table of Contents
Troubleshooting
