Juniper EX4300 Series Hardware Manual page 273

Table 74: System Information
Field
Device uptime
Last configured time
Health Status Panel
Table 75: Health Status
Field Description
EX2200, EX2200-C, EX3200, EX3300, EX4200, and EX4300-48MP Switches
Memory util. Indicates the memory used in the Routing Engine. In a Virtual Chassis configuration, the memory
utilization value of the primary Routing Engine is displayed.
NOTE: In EX4300-48MP switches, you can use only the built-in QSFP+ ports as VCPs to connect
the switch in a Virtual Chassis. You cannot connect the ports on the uplink module in
EX4300-48MP switches to Virtual Chassis ports (VCPs).
Flash Indicates the usage and capacity of internal flash memory and any external USB flash drive.
(Continued)
Description
Indicates the time since the last reboot. In a Virtual
Chassis configuration, to display the uptime of the
specific switch, click the image of that switch.
NOTE: For EX4650, EX4400, EX4100, and EX4100-F
switches, click the image of the switch to display the
uptime.
Indicates the time when the switch was last
configured.
For EX4400, EX4100, and EX4100-F switches in
Virtual Chassis configuration, indicates the last
configured time of the primary by default. To display
the last configured time of a specific switch, click the
image of that switch.
263