• The cables must be shielded RJ-45 cables.
• The cables must be rated for IEEE 802.3 BT, TIA standards, and UL-LP.
• The cables must follow NEC 725.144 article and local electric code.
• The operating temperature of the cable must be rated at 15° C more than the ambient
temperature.
Table 65: SFP Network Port Connector Pinout Information
Pin
Signal
1
VeeT
2
TX_Fault
3
TX_Disable
4
SDA
5
SCL-
6
MOD_ABS
7
RS
8
RX_LOS
9
VeeR
10
VeeR
11
VeeR
12
RD-
Description
Module transmitter ground
Module transmitter fault
Transmitter disabled
2-wire serial interface data line
2-wire serial interface clock
Module absent
Rate select
Receiver loss of signal indication
Module receiver ground
Module receiver ground
Module receiver ground
Receiver inverted data output
158