Juniper EX4300 Series Hardware Manual page 66

Hide thumbs Also See for EX4300 Series:

Table of Contents

• System reboot

• Load rescue

• Request VC port

• Factory default

LCD Panel Menus

The LCD panel has three menus: Idle, Status, and Maintenance. You can toggle between the LCD panel

menus by pressing the Menu button and navigate through the menu options by pressing the Enter

Table 11 on page 56

describes the LCD panel menu options.

Table 11: LCD Panel Menu Options in EX4300 Switches

In the Idle menu:

Press Enter to cycle through the Status LED modes, which are port status indicators:

ADM (administrative status)

DPX (duplex)

POE (Power over Ethernet) (only for EX4300-24P, EX4300-24P-S, EX4300-48P,

and EX4300-48P-S models)

"Network Port, Built-In QSFP+ Port, Uplink Port, and Uplink Module Port LEDs on

EX4300 Switches" on page 74

Press Menu to exit the Idle menu and go to the Status menu.

for information about the Status LED modes.

Troubleshooting