Spreader - Teejet; Single Section - TeeJet Technologies MATRIX PRO GS User Manual

Figure 6-6: Multiple Sections
Figure 6-7: Offset Directions and Distances
Matrix® Pro 570GS ● Matrix® Pro 840GS
Figure 6-8: Overlap
Spreader – TeeJet
A virtual line is created in line with the delivery disks from which
the application section or sections can vary in length and can be at
different distances from the line (availability depends on the specific
equipment in the system).

Single Section

No section control is available on the system.
1. Select
2. Press Implement Type NEXT PAGE arrow
3. Select from:
►Setup Type – used to select
►Antenna to Disks Distance
►Lateral Implement Offset Direction
►Lateral Implement Offset Distance
►Spread Offset Distance
►Spread Length
0% 50%
Spreader
implement type on Implement screen.
TeeJet

from the GNSS antenna to the disks or dispersal mechanism
lateral direction from the center line of the machine to the
center of the implement while facing in the machine's forward
direction
lateral distance from the center line of the machine to the
center of the implement

– used to set the distance
between the disks or dispersal mechanism and where product
initially hits the ground for the section

– used to set the length of application for
the section
98-05273-ENUS R6
100%
.
spreader type
– used to define the distance

– used to select the
 – used to define the
41