Options; Examples - Bentel Security KYO 320 Installation Manual

Valid entries: 1 through 31 (Day Number) or Monday,
Tuesday, etc. (Weekday).
+
The Interval MUST Start and Stop within the same
month.
Day of Week This field will allow you to select the Day.
Ø If you select an asterisk (*), the Day of the week will
be uninfluential.
Ø If you select a Weekday, you will not be able to spec-
ify the Day Number (1 through 31).
Type This field will allow you to select the Description
(label) of the Model.
Ø If you do not select a Description, the corresponding
Model will not be saved.
Ø You must select the Description of the Model on the
Start line of the interval. You cannot select the De-
scription on the Stop line as this field is automatic (*).
Sort Models This button will allow you to prioritize the
Models.
NOTE: Some days may belong to several Models. If
this occurs, the Scheduler will apply the Times of the
least frequent Model.
For example, the Christmas Holiday Model is applied
once a year, therefore, it will take priority over the
Weekday Model that is applied 5 days per week.
n Options
The Options button will open the programming window
of the parameters described in this section.
Max. Overtime Requests This option will allow you to
set the maximum number of Overtime Requests.
EXAMPLE: If a Timer controlled Partition is scheduled
to Arm at 17:45 — and the Overtime request period is
set at 60 minutes, and the Max. No. of Overtime re-
quests is set at 2 — Arming can be postponed until
19:45 by two Overtime requests (17:45 + 2 x 60 min-
utes), after which, Overtime requests will be ignored.
The maximum Overtime request is 180 minutes.
Ø If you select an invalid value, the application will rec-
tify it to the highest accepted value.
Ø If you select 0, the program will rectify it to 1.
+
Overtime Requests will affect the imminent Arming
event ONLY.
Example: If the 1st Arm event of a Partition is sched-
uled for 12:45 and the 2nd Arm event is scheduled for
15:30, and the User makes four 1-hour Overtime Re-
quests at 12.30 — with the intention of overlapping the
2nd Arm event (12:45 + 4 h = 16.45), the system will ig-
nore the overlap and will Arm the Partition at 15.30 as
scheduled.
Overtime request This is the delay before a sched-
uled Arming Time.
KYO 320
Example: If a Partition is scheduled to Arm at 17:45
and the Overtime Request is set at 60 minutes, and the
User makes an Overtime Request at 17.30, the Parti-
tion will Arm at 18:45 (17:45 + 1 h) unless the User
makes further Overtime Requests in the meantime.
Valid entries: 0 through 60 minutes, in 1-minute steps.
Ø If you enter a value of over 60 minutes, it will be recti-
Ø If you enter 0 minutes, Overtime Requests will be ignored.
n Examples
The following Models show: Weekday, Half-day, Bank
holiday, Summer holiday and Christmas holiday.
Weekdays This Model includes weekdays, regardless
of the Day number, Month and Year.
The Weekdays Model is an Interval and must be setup
on two lines.
On the upper line, select an asterisk (*) in the Day,
Month and Year fields, and Monday in the Day of
Week field.
On the lower line, select an asterisk (*) in the Day,
Month and Year fields, and Friday in the Day of Week
field.
Click the Interval field of the upper line: the words Start
and Stop will be shown.
Select Weekdays in the Type field.
Half-day This Model is for Half-day Closing.
Select an asterisk (*) in the Day, Month and Year fields,
and Saturday in the Day of Week field.
Select Half-day in the Type field.
Summer Holiday This Model is an Interval and must
be setup on two lines.
On the upper line, select the number of the first day of
the holiday period (e.g. 8) in the Day field, and the re-
spective Month in the Month field (e.g. August).
Select an asterisk (*) in the Year and Day of Week
fields.
On the lower line, select the number of the last day of
the holiday period (e.g. 23) in the Day field, and the re-
spective Month in the Month field (e.g. August).
Select an asterisk (*) in the Year and Day of Week
fields.
Click the Interval field of the upper line: the words Start
and Stop will be shown.
Select Summer holidays in the Type field.
PROGRAMMING FROM THE PC
fied automatically to 60 minutes.
DayMonth Year Interval Day of week
* * * Start
* * * Stop
DayMonth Year Interval Day of week
* * * *
DayMonth Year Interval Day of week
8 August * Start
23 August * Stop
Type
Monday Weekdays
Friday *
Type
Saturday Half-day
Type
* Summer Holiday
* *
73