Voice Messages - Bentel Security KYO 320 Installation Manual

! If this option is enabled, the Action will take absolute
Priority over all other Actions. Therefore, if one of its as-
sociated Events occurs, the Control Panel will suspend
any ongoing Digital Communicator calls, and will call
the telephone numbers of the Priority Action. To assign
Priority (!): double click on the corresponding cell.
+
Only one Digital Communicator Action can have
priority.
Code This field is for the Event Code. The Event Code
format depends on the selected Reporting Format (re-
fer to the EVENT CODE column in the Table 4) (for
CESA and Pulse protocol only).
The preset Event Codes of TELIM Reporting Format
CANNOT be edited (refer to "Reporting Formats" in the
"APPENDIX"). Therefore, the Communicator will trans-
mit the preset Event Code.
The preset Event Codes of CONTACT ID, SIA and SIA
over B-NET can be edited (refer to "Reporting Formats" in
the "APPENDIX"). If the cell is left empty, the Communicator
will transmit the preset Event Code, otherwise, it will transmit
the edited Event Code. For SIA and SIA over B-NET Re-
porting Formats accept 2 uppercase letters only.
1 ... 8 These Numbers represent the Digital Communi-
cator Telephone Numbers that will be called when the
Action occurs.
The Digital Communicator Numbers are represented by
their ID Number (see No. column on the Digital Commu-
nicator page). To select/deselect a Digital Communicator
Number, double click on the respective cell (YES indicates
that the Digital Communicator Number will be called).
+
If you associate an Action with a Digital Communicator
Number which transmits in CONTACT ID, TELIM,
CESA or SIA Reporting Format, any other Digital
Communicator Numbers, assigned to the Action con-
cerned, must transmit in the same Reporting Format.
All If this option is Enabled, the Control Panel
will call all the numbers when the correspond-
ing Action occurs. If this option is Disabled (at
default), the Control Panel will terminate the
call cycle after the first successful call. To en-
able (Y) this option, press ENTER or double
click on the respective cell.
Description This editable field is for the Ac-
tion label.
Events This button will allow you to select
the Events that will trigger the Action.
CONTACT ID If the selected telephone num-
ber is associated with CONTACT ID, it is possi-
ble to associate this reporting format automati-
cally to priority events, by selecting and confirm-
ing CONTACT ID (see the Figure 38).
DEFAULT SIA If the selected telephone num-
ber is associated with SIA, it is possible to asso-
KYO 320
ciate this reporting format automatically to priority events,
by selecting and confirming SIA (see the Figure 38).

Voice Messages

This function is provided by the K3/VOX2 Voice Board
(accessory item). The K3/VOX2 will allow the Control
Panel to manage up to 64 Voice Messages with program-
mable quality and length. The amount of message time
available depends on the sound quality of the messages,
and ranges from 3 minutes 48 seconds for high sound
quality, to 8 minutes 44 seconds for low sound quality (re-
fer to "K3/VOX2 Voice board" in the "APPENDIX").
+
The Voice messages can be used for the:
Ø Zone status control
Ø Answering Machine message
Ø Dialler messages
Ø Memo function
Ø Continuous Recording function
+
The layout of the Voice Messages page is as follows.
No. This is the non-editable Message ID Number. This
number substitutes the Message Description in some
parts of the application.
Figure 38 Voice Messages page
PROGRAMMING FROM THE PC
Message No. 63 can be used for the Memo func-
tion (refer to "Memo" in the USER'S MANUAL) and
Message No. 64 for the Continuous Recording
function (refer to "Enable Continuous Recording"
under "Options"). If the Home Memo and/or Contin-
uous Recording facilities are not used, these mes-
sages can be used for other purposes.
Voice Messages can be recorded and played at
the Keypad, as described in the KEYPAD
PROGRAMMING MANUAL.
53