General Features; The System And Accessories - Bentel Security KYO 320 Installation Manual

General Features

The KYO320 Control panel
r Up to 328 Alarm zones: 8 zones on the Main Board;
192 on 32 M-IN/OUT Expanders programmed as In-
puts (6 zones each) ; 64 on 32 PREMIUM Keypads
(2 zones per keypad); and 64 Wireless zones.
r Up to 102 Outputs: 6 Outputs on the Main Board (3
Relays and 3 Open-Collectors); 96 on 16 M-IN/OUT
Expanders programmed as Outputs (6 zones each)
r Up to 32 backlit LCD Keypads (PREMIUM,
CLASSIKA) for system control
r Up to 32 Digital Key/Card Readers
r 195 User Codes with programmable 'View' option,
priority and functions
r 10000 Event Log with date and time details
r Up to 8 power stations
r 4 wire Bus (protected against short-circuit) for pe-
ripherals
r Dual branch bus for protection against tamper
r Programmable Balance, Operating mode and Alarm
type — for all zones
r Input zones can be programmed to send specific
commands to the Control panel
r Outputs can be programmed as bistable or cyclic
with programmable cycle times and standby status
r 32 programmable partitions — each with own zones,
keypads, readers, outputs and times
r 195 User Codes with programmable priority and
functions
r 500 programmable Digital Keys/Cards
r 16 character labels (ID) for the partitions, zones,
keypads, readers, codes, keys/cards, etc. — the as-
signed label will be shown on the keypad display dur-
ing the user operations
r 10000 Event Log — provides details of the operation
type, time and user
r RS232 Interface for system programming and monitoring
r Software (runs under Windows) for Control panel
Programming, Teleservice and Monitoring
Telephone Facilities
r Pulse and Touch-tone (DTMF) dialling
r 50
Telephone numbers
Teleservice and Voice Calls
r Integrated Digital Communicator: supports Pulse,
DTMF and FSK Reporting formats
r 6 Instant Alarm calls from each Keypad
r Programmable Test call
r Double Call
r Line sharing with other Telephone devices
r 1200 baud FSK integrated Modem for Teleservice
management
Telephone facilities with K3/VOX2 optional Voice Board
r Dialler function: sends recordable voice messages
to up to 32 Telephone numbers
r Remote Inquiry with Voice answer (requires Access
Code)
r Remote control of Outputs, Arm/Disarm operations,
Alarm Reset (requires Access Code)
r Remote Listen-in and multipoint Telephone commu-
nication (Talk/Listen-in)
6
for Telemonitoring,
r Answerphone function
Scheduler function
r Daily, Weekly and Monthly scheduling
r Holiday and Daylight Saving (BST) changeover
management
r Overtime and Arming delay management
r 4 Arm and 4 Disarm operations per day per Partition
r 64 independent daily Timer events for KYO320.
Event print-out using optional K3/PRT2 Board
r Prints Events on parallel printer
r Real-time and/or Event Log printout from specified
date to last Event
r Event filter

The System and Accessories

The Control panel The Control panel is the core of the
system. It has 8-zones (KYO320 expands to 328); 6 Out-
puts (KYO320 expands to 102;) and a 3,6A Switching
Power Supply (5,4A accessory item).
M-IN/OUT The M-IN/OUT is an Input/Output Expander
which allows the number of zones and outputs of the
Control panel to be increased. It can be programmed to
function as: 6-zone Input Expander; Output Expander
with 6 Outputs; Input/Output Expander with 4 zones
and 2 Outputs; Input/Output Expander with 2 zones and
4 Outputs. In this manual the term Input Expander will
be used to refer to the M-IN/OUT programmed to func-
tion as an Input Expander or Input/Output Expander;
the term Output Expander will be used to refer to the
M-IN/OUT programmed to function as an Output Ex-
pander or Input/Output Expander. The Control panel
supports up to 32 Input Expanders and up to 16 Output
Expanders.
+
An M-IN/OUT programmed as an Input/Output Ex-
pander contributes both to the number of Input Ex-
panders and to the number of Output Expanders
connected to the Control panel.
The zones of the M-IN/OUT can operate in normal
mode, for connecting movement detectors, or as an in-
terface for connecting contacts for Roller blinds. The
M-IN/OUT's Outputs are of open-collector type, i.e.
floating or connected to Earth. The M-IN/OUT is con-
nected to the 4-wire bus (on the Control panel), through
which it communicates with the Control panel itself and
receives a feed for its own operation. The M-IN/OUT is
provided with a plastic container for flush or surface
mounting and equipped
Anti-snatch devices (excludable).
Control Devices The KYO320 accepts up to 32
ECLIPSE2 and/or PROXI Digital Key/Card Readers,
and/or up to 32 PREMIUM and/or
Keypads.
The operating principles of the ECLIPSE2 and PROXI
Readers are the same, except:
with Anti-tamper and
CLASSIKA LCD
KYO 320