Clear; Find; Event Description - Bentel Security KYO 320 Installation Manual

Digital Key If you Enable this option, all the Key events
will be shown. If this option is Disabled, the Key events
will be grouped in the following *Global* Event:
Ø Valid Key *Global*
Output If you Enable this option, the Supervised Out-
put events will be shown. If this option is Disabled, the
Supervised Output events will be grouped in the follow-
ing *Global* Event:
Ø Tamper on supervised output *Global*
Keypad If you Enable this option, the Keypad events
will be shown. If this option is Disabled, the Partition
events will be grouped in the following *Global* Event:
Ø Block keypad *Global*
Ø Recognized user code on Keypad *Global*
FAP Key If you Enable this option, the Super Key events
will be shown. If this option is Disabled, the Super Key
events will be grouped in the following *Global* Event:
Ø Super key *Global*
Keypad Codes If you Enable this option, all the Code
events will be shown. If this option is Disabled, the Code
events will be grouped in the following *Global* Event:
Ø Recognized user code *Global*
User Events If you Enable this option, all the Custom-
ized Events will be shown. If this option is Disabled, the
Customized Events will be grouped in the following
*Global* Event:
Ø User event *Global*
Timer If you Enable this option, all the Timer events will
be shown. If this option is Disabled, the Timer Events
will be grouped in the following *Global* Event:
Ø Timer *Global*
Reader If you Enable this option, all the Reader events
will be shown. If this option is Disabled, the Reader
Events will be grouped in the following *Global* Event:
Ø Key present on reader *Global*
+
You CANNOT associate Actions with Global
Events as they re not single events but represent
groups of Events that would not otherwise be
shown.
Show events concerning The drop-down menu in
this section (opened by clicking the arrow) will allow you
to filter the details of the Events (Enabled in the Show
Details section) that will be viewable, as follows.
Ø All: ALL the events concerning the Enabled Event
Types will be viewable.
58
Ø Zone: ONLY the events concerning the specified
Zone will be viewable (the Zone ID Number must be
entered in the small box).
Ø Partition: ONLY the events concerning the specified
Partition will be viewable (the Partition ID Number
must be entered in the small box).
Ø System: ONLY the System events will be viewable.
Ø Digital Key: ONLY the events concerning the speci-
fied Key will be viewable (the Key ID Number must
be entered in the small box).
Ø Output: ONLY the events concerning the specified
Supervised Output will be viewable (the Output ID
Number must be entered in the small box).
Ø Keypad: ONLY the events concerning the specified
Keypad will be viewable (the Keypad ID Number
must be entered in the small box).
Ø FAP Key: ONLY the events concerning the specified
SuperKey will be viewable (the SuperKey Number
must be entered in the small box).
Ø Keypad Codes: ONLY the events concerning the
specified Keypad Code will be viewable (the Keypad
Code ID Number must be entered in the small box).
Ø User events: ONLY the events concerning the speci-
fied Customized Event will be viewable (the Customized
Event ID Number must be entered in the small box).
Ø Timer: ONLY the events concerning the specified
Timer will be viewable (the Timer ID Number must be
entered in the small box).
Ø Reader: ONLY the events concerning the specified
Reader will be viewable (the Reader ID Number
must be entered in the small box).
n Clear
The Clear button will allow you to delete the Output,
Digital Communicator and Dialler Actions.
Select the Type of Action to be deleted (Output, Digital
Communicator or Dialler), then click OK to confirm the
operation.
n Find
This tool will allow you to find Events quickly. You must
enter part, or the entire Event label (Description), then
click the button. The application will go to the first
Event which contains the entered word or combination
of words. Click the button again to continue.
n Event Description
This section describes the conditions that generate,
and terminate each event.
Zone Events Table 5 shows Zone events associated
with Zone alarm and Zone Tamper events.
+
The conditions which
(ENDS WHEN ... column) are valid ONLY when the Zone
Event is NOT associated with a Monostable Output.
If the Zone event is associated with a Monostable Out-
put, the event will end when the Output OFF Timeout
expires, even if the conditions that triggered the event
are still present. In all other cases, the event will end
when the conditions clear (see Figure 41).
terminate Zone events
KYO 320