Central Station Maintenance; Log - Events Setup; Events-Actions - Bentel Security KYO 320 Installation Manual

The Trouble signal generated by the Installer Mainte-
nance Request and Installer Maintenance will termi-
nate when:
Ø the Teleservice page is downloaded;
Ø the Date and Time of Installer Maintenance are pro-
grammed at the Keypad (refer to "Teleservice" in the
KEYPAD PROGRAMMING MANUAL).
To set up the Installer Maintenance Request — Enable
the Maintenance Request option and set the Date and
Time, as follows.
Date Enter the date of the Installer Maintenance Re-
quest signal.
Time Enter the time of Installer Maintenance Request
signal.
Description Edit the message that will be shown on
Keypad (in View Mode) when an Installer Maintenance
Request is received.
n Central Station Maintenance
The Central Station Maintenance section will allow
you to program the date and time of the Monitoring
Maintenance Request signal.
The Monitoring Maintenance Request will be signalled
by the :
Ø Central station maintenance event;
Ø ON status of G indicator on the keypad.
+
The Trouble G indicator signals various Trouble
events. The Trouble details can be found on the
LCD Keypads (in View Mode). If the trouble is re-
lated to a Monitoring Maintenance Request, the re-
spective message will be shown (refer to
Description field in the Central station mainte-
nance section).
The Trouble signal generated by the Central station
maintenance request and the Central station mainte-
nance event will terminate when:
Ø the Teleservice page is downloaded;
the Date and Time of Monitoring Maintenance are pro-
grammed at the Keypad (refer to "Teleservice" in the
KEYPAD PROGRAMMING MANUAL).
You must Enable the Central Station Maintenance
option and set the Date and Time, as follows.
Date Enter the Date of the Central Station Mainte-
nance Request signal.
Time Enter Time of the Central Station Maintenance
Request signal.
Description Enter the message that will be shown on
the Keypad (in View Mode) when a Central Station
Maintenance Request is received.
56
Log – Events setup
The Events setup page will allow you to select the Events
that will be recorded in the log, and those that will be
printed, as follows.
+
The Event Printout is an accessory feature, and is
provided by the optional K3/PRT2 Printer Interface
(refer to "K3/PRT2 Printer Interface" in the
APPENDIX).
No. This is the Event ID Number.
Description This is the Event label.
Enabled Select the Events that will be recorded in the
log.
Printer Select the Events that will be printed.
Colour For a best reading of the Logger it is possible to
change the colour events.
+
In the Logger menu there is the Wiew window. In
this window you find the "Export" key. This key al-
lows yow to export the Logger as a text file. So
you can edit it by software as "Excel" or others. The
Logger export can be done in several way, using
many type of filters.

Events-Actions

The Events-Actions page determines how the system
will operate.
the
The Table in the Events-Actions page will allow you to
associate the Events (managed by the Control Panel)
with the Output, Digital Communicator and Dialler Ac-
tions, as follows.
No. This is the Event ID Number.
Description This is the Event label:
Ø the round brackets show the label of the device (Key-
pad, Reader, etc.) that is associated with the "Object"
(Zone, Code, Key, etc.) that generated the event;
Ø the square brackets show the Description of the "Object"
(Zone, Code, Key, etc.) that generated the event.
+
The events shown depend on the selected detail
level (see "Events Details").
Output The ON column is for the ID number of the Out-
put that must activate when the respective Event occurs
(refer to No. column on the Outputs page).
Enter 0 if the event is not to activate any Output.
+
You can select the required Output by double click-
ing the corresponding cell in the Output column.
KYO 320