Appendix; K3/Vox2 Voice Board; Features; Identification Of Parts - Bentel Security KYO 320 Installation Manual

K3/VOX2 Voice Board

!
Disconnect the Mains and battery power before
starting the installation procedure.
The K3/VOX2 Voice board records and plays Voice
messages. The recorded voice messages can be assi-
gned to the:
Ø Status enquiry
Ø Answer message
Ø Dialler messages
Ø Memo
Ø Continuous recording
n Features
r Messages stored on ChipCorder
r Manages up to 64 Voice messages with programma-
ble sound quality and duration — varying from 3
minutes 48 seconds of high sound quality to 8 minu-
tes 44 seconds of low sound quality
r Speaker for Message playback
r Telephone-dialler
r Answerphone
r Telephone access
r Listen-in and remote 2way Speaker system (Teleas-
sistance)
+
At default the Voice board will record messages, if
power to the Voice board fails, the recorded mes-
sages will be stored for at least 2 hours.
n Identification of Parts
No. DESCRIPTION
110 LED terminal : in the "remote Listen in" case, a
LED with 470 Ohm resistor must be connected
between the LED terminal and the + terminal.
111 Main Unit Voice board connector
112 Microphone
113 Local Microphone Jumper (114):
// = Local Microphone enabled (at default)
oo = Local Microphone disabled
114 Speaker Connector
115 Terminal board (for Microphone board connec-
tion) (VOX-REM)
KYO320
n Installation
Work carefully through the following steps (see Figure 2
and Figure 2 in the Installation Manual Vol.1).
1. Insert the Speaker into one part of the plastic hol-
der.
2. Join the two parts then twist to lock in place.
3. Screw the Speaker onto the backplate.
4. Plug the Voice board into the connector 17, secure
it firmly in position by means of the screws (see
Installation Manual Vol.1).
5. Plug the Speaker into the connector 114 on the Voi-
ce board.
n Expanding Listen-in coverage
You can expand Listen-in coverage by connecting se-
veral Microphone-Speaker boards to the Voice board.
This is especially useful for large premises, or in places
where there is a high risk of sound muffling caused by
walls or heavy machinery, etc.
+
In the text and diagrams in this section, the term
"Voice Module" refers to VOX-REM Microphone-Lo-
udspeaker board.
The VOX-REM Microphone-Speaker board can be ho-
used in custom made accessory boxes with wire entry
knockouts (order code: MINI-BOX). The MINI-BOX can
be wall mounted, or flush mounted to 503 outlet boxes
111
Figure 2 Voice board components

APPENDIX

APPENDIX
112 113 114
EXT.SP
EN.MIC
115
110
39