Telephone; Phonebook; Dialler - Bentel Security KYO 320 Installation Manual

Telephone

The Telephone option will allow you to setup the Con-
trol panel Phonebook, the telephone line parameters
and the Answering machine.
From the Programming menu:
PROGRAMMING
Configuration
1. Using A or B, select the Telephone option
PROGRAMMING
Telephone
2. Press ENTER:
Telephone
Panel Phonebook
3. Using A or B, select Panel Phonebook, Dialler, Dig.
communicat., Aux.communicator or AnsweringMa-
chine, as required, then press ENTER. Refer to the re-
spective paragraph for instructions.
n Phonebook

Phonebook

Phone numbers
4. Using A or B, select Phone numbers, or Phone op-
tions then press ENTER. Refer to the respective para-
graph for instructions, or press ESC to go back to step
3.
Phone numbers
Tel. numb.n. 001
Phone number 001
5a. Using A or B, select the Telephone Number to be pro-
grammed, then press ENTER, or press ESC to go back to
step 4.
Description
Phone number 001
6a. Enter the Telephone number label (refer to "Entering
a text" under "Using the Keypad"), then press ENTER:
Phone number 001
_
7a. Using keys 0 through 9, enter the telephone num-
ber.
— OFF corresponds to the hash sign (#);
— ON corresponds to the comma and star, when the
display shows the required character, press D to conti-
nue;
— C and D will allow you to move the cursor along the
line and overwrite wrong digits. To delete the entire Te-
32
lephone number, press and hold 1 until the keypad
emits a beep.
+
If you wish to include pound (#) or star (*) in the te-
lephone numbers, you must program the telepho-
ne numbers from a keypad.
Press ENTER to go back to step 5.
Phone options
Max.rings number
Number 04
5b. Set the number of Rings the Control panel must al-
low before answering the call, then press ENTER.
1
KEYS
1-8 1
Keys to use for
9-16 9
the telephone
17-24 17
number groups
25-32 25
DISPLAY 1
Table 8 Programming the telephone number groups
Delay Calls
Sec. 0000
6b. Set the Start telephone call delay, then press
ENTER.
Dialling option
Wait dial tone
7b. Using A or B, select Wait dial tone (refer to "Tone
check"), Test tel. line (refer to "Telephone line check")
Pulse dialling (refer to "Pulse dial") or High/Low Volu-
me , then press ON or OFF, respectively, to enable or
disable the option concerned ("û" means enabled, and
"-" means disabled). If the option Wait dial tone is disa-
bled, press ENTER to go back to step 4, or:
Timeout for tone
Sec. 12
8b. Set the Timeout for dial tone (i.e. the time the Con-
trol panel must wait for the dial tone before aborting the
call, then press ENTER to go back to step 4.
n Dialler

Dialler

Dialler numbers
4b. Using A or B, select Dialler numbers, Dialler ac-
tions or Dialler settings, then press ENTER. Refer to
the relevant paragraph for instructions, or press ESC to
go back to step 3.
2 3 4 5 6 7
2 3 4 5 6 7
10 11 12 13 14 15
18 19 20 21 22 23
26 27 28 29 30 31
2 3 4 5 6 7
KYO320
8
8
16
24
32
8