Multicast Group Membership - Nortel BayStack 450-24T Using Manual

Using the Console Interface

Multicast Group Membership

The Multicast Group Membership screen allows you to view configured IP
multicast group addresses for specific VLANs. The screen displays the IP
multicast group addresses associated with ports that are configured within a
standalone switch or a stack of switches.
Note: The Multicast Group Membership screen will not display any entries if
the Snooping field value is set to Disabled in the IGMP Configuration screen
(see "IGMP Configuration" on page 3-79).
The displayed addresses are dynamic, and can change as clients join or leave the
various IP multicast groups. You can view changes by refreshing the screen (press
[Ctrl]-P to refresh the screen).
Choose Display Multicast Group Membership (or press d) from the IGMP
Configuration Menu to open the Multicast Group Membership screen.
3-83
309978-D Rev 01