10 Mhz Oven Board (Opt. 1E5) Replacement; Tools Required; Removal Procedure; Replacement Procedure - Agilent Technologies E5071C Service Manual

10 MHz Oven Board (Opt. 1E5) Replacement

Tools Required

• TORX screwdriver, T10, T15, and T20

Removal Procedure

Refer to Figure 6-14 for this procedure.
Step 1. Remove the outer cover as described in "Outer Cover Removal" on page 266.
Step 2. Remove the six TORX T10 screws (item 1) fastening the rear cover.
Step 3. Release the clamped cables from the clamps (item 2) on the rear cover.
Step 4. Disconnect the cables (item 3, 4) from the oven.
Step 5. Remove the three TORX T10 screws (item 5) fastening the oven.
Figure 6-26 10 MHz Oven Board Removal
5
e5071cse1109

Replacement Procedure

Step 1. Replace the 10 MHz oven board by inverse procedure of removal.
Chapter 6
10 MHz Oven Board (Opt. 1E5) Replacement
1
1
Replacement Procedure
4
2
3
311