Hard Disk Assembly Removal Option 019; Tools Required; Removal Procedure - Agilent Technologies E5071C Service Manual

Replacement Procedure

Hard Disk Assembly Removal Option 019

Hard Disk Assembly Removal Option 019

Tools Required

•
•

Removal Procedure

Refer to Figure 6-8 for this procedure.
Step 1. Remove the outer cover as described in "Outer Cover Removal" on page 266.
Step 2. Remove the front panel as described in "Front Panel Removal" on page 267.
Step 3. Disconnect the two cables (item 1).
Step 4. Remove the four TORX T10 screws (item 2) fastening the hard disk assembly.
Step 5. Lift the hard disk assemby (item 3).
Step 6. Remove the two TORX T10 screws (item 4) fastening the bracket.
Step 7. Remove a TORX T10 screw (item 5) fastening the bracket.
Step 8. Be careful to release the hook from chassis (item 6) and lift the bracket (item 7).
Figure 6-8 Removable Hard Disk Assembly Replacement Opton 019
2
e5071cse3005
278
TORX screwdriver, T10, T15, and T20
Flat edge screwdriver
1
2
3
7
4
5
6
Chapter 6