To Configure The Cpu Mother Board Assembly And Bios; To Identify The Motherboard Installed; Testing Dram On The Motherboard - Agilent Technologies E5071C Service Manual

Troubleshooting

To configure the CPU Mother Board Assembly and BIOS

To configure the CPU Mother Board Assembly and BIOS
When you replace the CPU Mother Board Assembly , you need to confirm the BIOS
options using the BIOS setup utility procedure. The BIOS setup procedure is described in
"To Confirm or Set the BIOS Options" on page 209.

To Identify the Motherboard Installed

Confirm the splash screen is displayed in the beginning of the boot process as shown in
Figure 4-5.

Testing DRAM on the Motherboard

When the CPU Mother Board Assembly is replaced with a new one, it is advisable to
perform the DRAM test before proceeding to the BIOS setup utility procedure. Confirm
the DRAM count in accordance with the following procedure.
Step 1. Connect the external keyboard and mouse to the E5071C rear panel connectors.
Step 2. Turn the instrument on. Wait until the E5071C boots up. Do not press any key until the
E5071C measurement view appears.
Step 3. Press
Step 4. Click
Step 5. Click
Step 6. Scroll the function viewer to find "System" icon and double-click "System". This opens
"System Properties" window as shown in Figure 4-25.
Figure 4-25 System Properties window
e5071cse1170
208
key on the front panel.
in the softkey menu.
Misc Setup
in the softkey menu.
Control Panel...
Chapter 4