Calibration Of The Touch Screen - Agilent Technologies E5071C Service Manual

Calibration of the Touch Screen

After E5071C measurement screen appears, you have to calibrate the touch screen. Follow
the procedure described below to calibrate the touch screen.
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
The touch screen calibration screen (Figure B-7) appears.
Figure B-7 Touch Panel Calibration Screen
e5071cse1078
Step 5. Touch the x mark on the upper left with your finger. The mark x appears also on the upper
right, lower left, and lower right. Touch the x marks in that order with your finger.
Touching the four locations described above with your finger automatically concludes the
touch screen calibration.
NOTE With no operation on the touch screen calibration screen for a preset time, it automatically
closes and the previous measurement screen reappears.
Appendix B
.
.
Service Menu
.
Test Menu
.
Adjust Touch Screen
System Recovery
Calibration of the Touch Screen
359