Replacement Procedure - Agilent Technologies E5071C Service Manual

Ena rf network analyzers

Hide thumbs Also See for E5071C:

Table of Contents

Removable Hard Disk Drive Removal Option 017

e5071cse3004

Replacement Procedure

Step 1. Replace the removable hard disk drive by inverse procedure of removal.

Fasten the TORX T10 screws (item 7) using a torque screwdriver.

Step 2. Insert the hard disk into the slot.

Step 3. Turn the key to the left until it is locked, then remove the key.

Step 4. Restore backup files onto the new removable hard disk drive as described in "Restore

Backup Files onto the New Hard Disk Drive" on page 272.

Step 5. Calibrate the touch screen as described in "Calibration of the Touch Screen" on page 272.

Removable Hard Disk Drive Replacement Option 017

Replacement Procedure