Replacement Procedure - Agilent Technologies E5071C Service Manual

Ena rf network analyzers

Hide thumbs Also See for E5071C:

Table of Contents

Replacement Procedure

Step 1. Paste the heat transfer sheet to the hard disk drive rear side.

Removable Hard Disk Drive Removal Option 019

Step 2. Replace the hard disk drive by inverse procedure of removal.

Fasten the TORX T10 screws (item 3) using a torque driver.

Step 3. Restore backup files onto the new removable hard disk drive as described in "Restore

Backup Files onto the New Hard Disk Drive" on page 272.

Step 4. Calibrate the touch screen as described in "Calibration of the Touch Screen" on page 272.

Replacement Procedure

Hard Disk Drive Replacement Option 019