Midplane Board Replacement - Agilent Technologies N9039A Service Manual

Assembly Replacement Procedures
Midplane Board Assembly

Midplane Board Replacement

1. Refer to Figure 7-19. Install the midplane assembly into the chassis and attach
to the midplane bracket using the six screws (2) removed earlier. Torque to 9
inch-pounds.
2. Replace the power supply assembly and it's support bracket. Refer to the
Supply Assembly replacement procedure.
3. Replace the top brace. Refer to the
4. Replace the rear panel. Refer to the
5. Replace the processor assembly. Refer to the
procedure.
6. Replace the instrument outer case. Refer to the
replacement procedure.
190
Top Brace replacement procedure.
Rear Panel replacement procedure.
Processor Assembly
Instrument Outer Case
Power
replacement
Chapter 7