Front Panel Cover Removal; Tools Required; Removal Procedure - Agilent Technologies E5071C Service Manual

Ena rf network analyzers

Hide thumbs Also See for E5071C:

Table of Contents

Replacement Procedure

Front Panel Cover Removal

Refer to Figure 6-28 for this procedure.

Step 1. Remove the outer cover as described in "Outer Cover Removal" on page 266.

Step 2. Remove the front panel as described in "Front Panel Removal" on page 267.

Step 3. Disconnect the cables (item 1, 2, 3, 4) connected through the cover.

Step 4. Remove the six TORX T10 screws (item 5) fastening the cover.

Front Panel Cover Removal

e5071cse1111

TORX screwdriver, T10, T15, and T20

Flat edge screwdriver