Servo Amplifier Battery Mounting Method - Mitsubishi Electric MELSERVO-J2S Series Transition Handbook

Part 7: Common Reference Material

3.1.1 Servo amplifier battery mounting method

MR-J4-350_ or less
POINT
For the servo amplifier with a battery holder on the bottom, it is not possible to
wire for the earth with the battery installed. Insert the battery after executing the
earth wiring of the servo amplifier.
Install a battery, and insert the
plug into the CN4 connector.
MR-J4-500_ or more
7 - 95
Install a battery, and insert the
plug into the CN4 connector.