Servo Setup Software: Setup Software (Setup161E) ⇒ Mr Configurator2; Communication I / F: Rs-232C ⇒ Usb - Mitsubishi Electric MELSERVO-J2S Series Transition Handbook

Part 7: Common Reference Material
1.2.6 Servo setup software: Setup software (SETUP161E) ⇒ MR Configurator2
Item
Servo setup software
(1) MR Configurator2 (SW1DNC-MRC2-E) specification
Item
Project
Parameter
Positioning data (Note 2)
Monitor
Diagnostics
Test operation
Adjustment
Others
Note 1. This function is available only in standard control mode.
2. SW1DNC-MRC2-E supports only MR-J4-_A_-RJ.
(2) System configuration
For servo setup software components, refer to the Instruction Manual.
1.2.7 Communication I / F: RS-232C ⇒ USB
For connection with PC-AT compatible personal computer
Item
Communication cable
MR-J2S series
Setup software (SETUP161E)
Model: MRZJW3-SETUP161E
Create/read/save/delete project, system setting, and print
Parameter setting, amplifier axis name setting, parameter converter (Note 1)
Point table, program, indirect addressing
Display all, I/O monitor, graph, and ABS data display
Alarm display, alarm onset data display, drive recorder, display of the reason for no rotation, system
configuration, life diagnosis, machine diagnosis.
Jog operation, positioning operation, motor-less operation, DO forced output, and program
operation, test operation event information, single-step feed (Note 2)
One-touch tuning, tuning, and machine analyzer
Servo assistant, parameter setting range update, help display, connection to MITSUBISHI
ELECTRIC FA Global Website
MR-J2S series
RS-232C communication
MR-CPCATCBL3M
Cable length: 3 m
MR-J4 series
→
MR Configurator2
Model: SW1DNC-MRC2-E
Description
MR-J4 series
USB communication
→
MR-J3USBCBL3M
Cable length: 3 m
7 - 18