Mitsubishi Electric MELSERVO-J2S Series Transition Handbook page 619

[Appendix 2] Introduction to Renewal Tool
6. SPECIFICATIONS
6.1 Standard Specifications
(1) Renewal kit specifications
Item
Voltage/Frequency (Note)
Permissible voltage
fluctuation (Note)
Permissible frequency
fluctuation
Operation
Ambient
temperature
Storage
Operation
Ambient
humidity
Storage
Ambience
Altitude
Vibration
Note : Exclude for 400 V, since a terminal block is not included with.
6.2 Terminal Block Specifications
(1) SC-J2SJ4KT02K, 06K
SC-J2SBJ4KT02K, 06K
SC-J2SCPJ4KT02K, 06K
TE1
L L L
1 2 3
U V W
Terminal screw: M4
Tightening torque: 1.2 [N•m]
TE2
D C P L
21
Plug-in connector type
1-phase 100 V AC to 120 V AC, 50/60 Hz.
3-phase 200 V AC to 240 V AC, 50/60 Hz.
1-phase 85 to 127 V
3-phase 170 V AC to 264 V AC.
Within ±5%.
0 to +55 °C (non-freezing).
-20 to +65 °C (non-freezing).
90% RH or less (non-condensing).
Indoors (no direct sunlight) and
free from corrosive gas, flammable gas, oil mist, dust, and
dirt
1000 m or less above sea level.
5.9 m/s 2 or less, 10 to 55 Hz (Each direction of X, Y, and
Z).
(2) SC-J2SJ4KT1K
SC-J2SBJ4KT1K
SC-J2SCPJ4KT1K
TE1
L L L
1 2
U V W
Terminal screw: M4
Tightening torque: 1.2 [N•m]
TE2
L D C P L
11
Plug-in connector type
Appendix 2-82
Specifications
3
L N
21 11
(3) SC-J2SJ4KT3K
SC-J2SBJ4KT3K
SC-J2SCPJ4KT3K
TE1
L L L U
1 2 3
Terminal screw: M4
Tightening torque: 1.2 [N•m]
TE2
L L D P
11 21
Terminal screw: M4
Tightening torque: 1.2 [N•m]
V W
C N