Mitsubishi Electric MELSERVO-J2S Series Transition Handbook page 458

Part 9: Review on Replacement of Optional Peripheral Equipment
8. SETUP SOFTWARE
8.1 MR-J2S Series Setup Software
Setup software (MRZJW3-SETUP161E) uses the communication function of the servo amplifier to change
parameter setting values, display graphs, and perform test operations, etc., on the personal computer.
8.1.1 Specifications
Item
Communication signal
Baud rate [bps]
Monitor
Alarm
Diagnosis
Parameter
Test operation
Advanced function
File operation
Others
8.2 MR-J4-Series MR Configurator2
MR Configurator2 (SW1DNC-MRC2-E) uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
8.2.1 Specifications
Item
Project
Parameter
Positioning data (Note 2)
Monitor
Diagnostics
Test operation
Adjustment
Others
Note 1. This function is available only in standard control mode.
2. This function is available only for MR-J4-_A_-RJ.
RS-232C
57600/38400/19200/9600
Display all, high-speed display, graph display
(Minimum resolution changes with the processing speed of the personal computer.)
Display, history, amplifier data
DI/DO display, display of the reason for no rotation, power ON cumulative display, software
No. display,
motor information display, tuning data display, ABS data display, VC automatic offset display,
axis name setting
Parameter list, turning, change list, detailed information
JOG operation, positioning operation, motor-less operation, DO forced output, and program
operation
Machine analyzer gain search, machine simulation
Data read, save, print
Automatic operation, station number setting, help display
POINT
MR-J4-_A_-RJ servo amplifiers are supported with software version 1.19V or
later.
Create/read/save/delete project, system setting, and print
Parameter setting, amplifier axis name setting, parameter converter (Note 1)
Point table, program, indirect addressing
Display all, I/O monitor, graph, and ABS data display
Alarm display, alarm onset data display, drive recorder, display of the reason for no rotation,
system configuration, life diagnosis, machine diagnosis
JOG operation, positioning operation, motor-less operation, DO forced output, and program operation,
Test operation event information, single-step feed (Note 2)
One-touch tuning, tuning, and machine analyzer
Servo assistant, parameter setting range update, help display, connection to MITSUBISHI ELECTRIC
FA Global Website
Description
Description
9 - 49