Configuration With Peripheral Equipment - Mitsubishi Electric MELSERVO-J2S Series Transition Handbook

Part 5: Review on Replacement of MR-J2S-30 kW or Higher Capacity Models with MR-J4-DU_

1.3 Configuration with Peripheral Equipment

(1) MR-J2S series
3-phase AC power supply
No-Fuse breaker
(NFB)
Magnetic
contactor
Line noise filter
(FR-BLF)
No-Fuse breaker
(NFB)
improving DC reactor
Regenerative option
Note 1. P and N conductor bars to connect a converter unit and servo amplifier are standard accessories.
2. This system requires a converter unit.
3. Use an MR-J2HBUS_M_SSCNET cable as the protection coordination cable.
(Note 2)
Converter unit
(Control signal)
Power factor
Setup
software
(SETUP161E)
Communication
cable
(Note 1)
Protection
coordination cable
(Note 3)
5 - 4
Personal
computer
Servo amplifier
Encoder cable
Servo motor