Input Configuration Menu - Extron electronics Multi-Graphic Processor MGP 464 HD-SDI User Manual

Input Configuration menu

The Input Configuration menu allows you to select a video signal type for each
of the four fully configurable inputs. All of these inputs can accept the following
video signals: RGB, YUV-HD, YUVi, RGBcvS, S-video, composite video, DVI
(MGP 464 DI and MGP 464 HD-SDI only), and HD-SDI (MGP 464 HD-SDI only);
RGB is the default. You can also select the horizontal and vertical start positions,
pixel sampling phase for the four windows (except for YUVi, S-video, and
composite video inputs), total pixels, active pixels, and active lines for each input.
Rotate the horizontal Adjust ([) knob to cycle through the four inputs, and the
vertical Adjust knob ({) to adjust the setting.
N The 15 virtual inputs (numbered 5 through 19) cannot be configured from the
Auto
Image
Menu
Input
Configuration
Next
Input #1
Next
RGB
Input Input video type
Input
Select a signal format:
• Input #1 • Input #1
• Input #2 • RGB
• Input #2
• Input #3 • YUV-HD
• Input #3
• RGBcvS
• Input #4
• Input #4
• YUVi
• S-video
• Composite
• DVI (MGP 464 DI and
MGP 464 HD-SDI only)
• HD-SDI (MGP 464 HD-SDI only)
Next
Input #1
Next
Active Lns 1024
Input Input
Active Lines
• Input #1 Specify the height • Input #1
• Input #2 • Input #2
in lines of the
active image area
• Input #3 • Input #3
to be sampled.
• Input #4 • Input #4
Input Configuration menu flow
front panel; you must use SIS commands, the Windows-based control software,
or the MGP 464 Web pages.
Input #1
Input #1
Next
Film Mode ON
Vert Start 0128
Film Mode Input
Turn Film Mode on
• Input #1
or off (for low-
• Input #2
resolution devices).
• Input #3
• Input #4
Input #1
Input #1
Next
Active Pxl 1280
Total Pxl 1688
Input
Active Pixels
• Input #1
Specify the width
in pixels of the • Input #2
active image area • Input #3
to be sampled.
• Input #4
Input #1
Next
Horz Start 0128
Vertical Start
Input Horizontal Start
Select a vertical
Select a horizontal
• Input #1
start line position
start pixel position
• Input #2
for the top edge of
for the left edge of
• Input #3
the active video.
the active video.
• Input #4
Input #1
Next
PxPhs Win#4 16
Input
Pixel Phase 4
Total Pixels
• Input #1 Adjust the pixel
Specify the width in
• Input #2
sampling point for
pixels of the total
window 4 for each
• Input #3
image area to be
input.
sampled. • Input #4
MGP 464 • Operation
Input #1
Next
PxPhs Win#1 16
Input Input Next
Pixel Phase 1
• Input #1 • Input #1 Adjust the pixel
• Input #2 • Input #2 sampling point
for window 1 for
• Input #3 • Input #3
each input.
• Input #4 • Input #4
Input #1
PxPhs Win#2 16
Input
Pixel Phase 2
Next
• Input #1
Adjust the pixel
• Input #2
sampling point
• Input #3 for window 2 for
each input.
• Input #4
Input #1
Next
PxPhs Win#3 16
Input
Pixel Phase 3
• Input #1 Adjust the pixel
• Input #2
sampling point for
window 3 for each
• Input #3
input.
• Input #4
3-9