Connecting To The Electricity Source - Waters Xevo TQ MS Operator And Maintenance Manual

Connecting to the electricity source

The mass spectrometer requires a separate, grounded electricity source. The
ground connection in the electrical outlet must be common and connected near
the system.
To connect to the electricity source
Recommendation:
(UPS) for optimum long-term input voltage stability.
Warning:
United States and HAR-type (or better) in Europe. For information
regarding what cord to use in other countries, contact your local
Waters distributor.
1. Connect the female end of the power cord to the receptacle on the rear
panel of the mass spectrometer.
2. Connect the male end of the mass spectrometer power cord to a suitable
200 to 240 V a.c. wall outlet.
C-28 External Connections
Use a line conditioner or an uninterruptible power supply
To avoid electrical shock, use the SVT-type power cord in the