Manitowoc Grove RT9150E Operator's Manual page 115

RT9150E OPERATOR MANUAL
Item Description
Maximum/Current
swing angle
7
display
Enter objects
8
submenu
Overall height
9 monitoring; on/off,
F9
Working radius
10 monitoring; on/off,
F10
Swing angle
11 monitoring; on/off,
F11
Object monitoring;
12
on/off, F12
Manual input on/
13
off
Grove
OPERATING CONTROLS AND PROCEDURES
Graphic
Published 2-23-2017, Control # 644-00
Explanation
The display (3) indicates values for the
swing angle.
The display shows the following
values:
(4) Limit value, red
(5) Current value, blue
In case of manual input mode switched
on, the display (5) changes.
(1) Limitation by object display
(2) Point data display
(3) Current point data display
(4) Manual input on/off
(5) Select Previous point
(6) Select Next point
(7) Select angle/working radius
(8) Delete selected point data
(9) Delete all point data
Refer to Entering Points and Objects,
page 3-42.
Press the buttons for the required
monitoring functions once.
(1) Overall height
Dot is green: Monitoring switched on.
Dot is black: Monitoring switched off.
Press the buttons for the required
monitoring functions once.
(2) Working radius
Dot is green: Monitoring switched on.
Dot is black: Monitoring switched off.
Press the buttons for the required
monitoring functions once.
(3) Swing angle
Dot is green: Monitoring switched on.
Dot is black: Monitoring switched off.
Press the buttons for the required
monitoring functions once.
(4) Objects
Dot is green: Monitoring switched on.
Dot is black: Monitoring switched off.
Press the button (1), the dot changes
color:
• Green: on
• Black: off.
3
3-41