OPERATION
RIPPER CONTROL LEVER FOR VARIABLE MULTI-SHANK RIPPER SPEC MA-
CHINES
The ripper control lever is used for operating the ripper.
Lifting operation
(a) RAISE
(b) HOLD: Ripper is stopped and held in this position.
(c) LOWER
Tilting operation
(A) Tilt IN
(B) Tilt BACK
OTHER EQUIPMENT
DOOR OPEN LOCK
Use the door lock to fix the door in position after opening it.
1.
Push the door against the door catch (1).
The door is fixed to the catch.
2.
To release the door, move lever (2) inside the cab to the front of the cab.
EXPLANATION OF COMPONENTS
3-95