Komatsu D85EX-18 Operation & Maintenance Manual page 126

EXPLANATION OF COMPONENTS
F5: Cancels the change of setting and returns to the monitor setting menu screen.
F6: Changes the setting and returns to the monitor setting menu screen.
ADJUST CAMERA IMAGE BRIGHTNESS
1.
Select Brightness Adjustment on the Camera Screen Ad-
justment menu.
2.
Press switch F6.
3.
Use switches F2 to F6 to adjust brightness of the screen.
F2: Resets an adjusted value to default value.
F3: Moves the indicator to the left by one notch.
F4: Moves the indicator to the right by one notch.
F5: Cancels change and returns to the Camera Screen
Adjustment menu.
F6: Accepts change and returns to the Camera Screen Ad-
justment menu.
REMARK
As long as "*" mark is displayed in the upper right corner of the
screen, brightness is automatically restricted by the machine
monitor to protect the liquid crystal. Screen adjustment may not
change the screen brightness as long as "*" mark is displayed.
However, it is not an error.
SET DISPLAY MODE
(Reverse Synchronization setting)
1.
Select the display mode on the Screen Adjustment (Cam-
era) screen.
2.
Press switch F6.
3.
The Camera View Mode setting screen is displayed.
• Normal: Switch F2 of the function key is used to
change the screen to the camera screen.
• Reverse Synchronization: Camera screen is automati-
cally displayed when the gear shift lever is set to re-
verse.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line on the next page.
3-72
OPERATION