Table of Contents
Advertisement
SAFETY
(11) Caution for handling ROPS/FOPS (09620-A3001, 09620-
A2001)
ROPS/FOPS CERTIFCATION
This protective structure complies with the standard provided
that it is properly equipped on the machine which mass is less
than the specified maximum mass.
•
If some modification is applied to the ROPS or FOPS, it
may effect the strength and may not comply with the
standard. Do not drill, cut or weld on the ROPS or FOPS structure. Consult Komatsu Distributor before al-
tering.
•
ROPS or FOPS may provide less protection if it has been structurally damaged or involved roll-over. Con-
sult Komatsu Distributor in that case.
•
Always wear seat belt when moving.
(12) Caution for blast site (09845-00480)
(only when equipped with KOMTRAX)
•
Sign indicates an explosion hazard caused by active radio
transmitter at a blast zone.
•
Keep machine at a safe distance from a blast zone and
detonator.
(13) Caution for high-temperature parts (6166-15–9990)
•
Sign indicates a burn hazard from touching heated parts,
such as engine, motor or muffler during or right after oper-
ation.
•
Never touch when hot.
(14) Caution for handling DEF (09632-61480)
•
To avoid engine damage or fire, fill with DEF only.
•
Never use diesel fuel.
SAFETY LABELS
2-9
Advertisement
Chapters
Table of Contents
