Table of Contents
Advertisement
HANDLE AIR CONDITIONER
When doing this, check that temperature setting (a) and air
flow (b) are displayed.
2.
Press vent selector switch (2) and set the vent display on
the display monitor to (f) or (g) as shown in the figure.
3.
Press FRESH/RECIRC selector switch (3) and set it to
FRESH mode.
4.
Press temperature control switch (4) and set temperature
on the monitor to "32.0" of maximum heating.
5.
Adjust the vents so that the air blows onto the window
glass.
3-208
OPERATION
Advertisement
Chapters
Table of Contents
