Komatsu D85EX-18 Operation & Maintenance Manual page 205

OPERATION
METHOD FOR HEATING SEAT
Turn the seat heater switch ON.
(a): OFF position
(b): ON position
The backrest and seat surface are heated.
When the seat heater switch is turned ON, the heater in the seat operates. When the seat surface temperature
exceeds approximately 20 °C, the heater is turned OFF automatically. When the temperature decreases below
approximately 10 °C, the heater is turned ON automatically.
REMARK
When the seat surface temperature is above approximately 20 °C, the heater does not operated even if switch
(8) is turned ON.
METHOD FOR ADJUSTING MIRRORS
Be sure to adjust the mirrors before starting work.
If they are not adjusted properly, you cannot secure the visibility and may be injured or may lead to a
serious personal injury or death.
Loosen nut (1) installed to the mirror.
Adjust position of the mirrors so that they can be seen most
easily from the operator's seat.
In particular, be sure to adjust the mirror so that people at the
rear left or right of the machine can be seen clearly.
MACHINE OPERATIONS AND CONTROLS
k k
WARNING
3-151