Table of Contents
Advertisement
OPERATION
METHOD FOR CHECKING FUEL LEVEL, ADDING FUEL
When adding fuel, never spill the fuel or let it overflow. It may cause a fire.
If any fuel has spilled, wipe it up completely. If fuel has spilled over soil or sand, remove that soil or
sand.
Fuel is highly flammable and dangerous. Do not bring any open flame close.
When performing operations on slopes, to prevent the engine from sucking in air, pay careful attention to the
amount of fuel remaining in the tank.
1.
Turn the starting switch to ON position (B).
2.
Check the remaining level by fuel gauge (G) on the ma-
chine monitor.
3.
After checking, turn the starting switch back to OFF posi-
tion.
4.
If the fuel level is low, add fuel through fuel filler port (F).
Fuel tank capacity: 470 ℓ
5.
After adding, tighten the fuel filler cap securely.
MACHINE OPERATIONS AND CONTROLS
k
k
WARNING
3-139
Advertisement
Chapters
Table of Contents
