Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
When camera is set
•
When the starting switch is turned to ON position, the opening screen GG is displayed.
•
After the opening screen GG is displayed for 2 seconds, the screen switches to the camera image FF.
•
After the camera image FF is displayed for 2 seconds, the screen switches to the check before starting
screen BB.
•
After the check before starting screen BB is displayed for 2 seconds, the screen switches to the preset
(speed range when moving machine off) display screen HH.
•
After the preset (starting gear speed) display screen HH is displayed for 2 seconds, the screen switches to
standard screen AA.
REMARK
When the engine is started, the battery voltage may suddenly drop depending on the temperature and the bat-
tery condition. If this happens, the machine monitor may restart, but this does not indicate any abnormality.
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING ENGINE WHILE
ENGINE SHUTDOWN SECONDARY SWITCH IS ON
While engine shutdown secondary switch (1) is ON (engine is
stopped), when the starting switch is turned to ON position, the
screen shown in the figure is displayed and engine does not
start.
3-8
OPERATION
Advertisement
Chapters
Table of Contents
